Nº1 «Visible profile» 
It is used for wall or another vertical surfaces fixing, it has a wide visible part – 26 mm. The visible part is white and semidull. You should use the canvas with the visible harpoon for such profiles, ghost types are not needed. Minimum height loss is 2 cm. So to six the ceiling into this profile you can use a corner shovel, a straight shovel, a corner retractor, a straight retractor. The length of profile is 3 m. |
Nº2 «Invisible profile» 
Nowadays this profile is the most common one. It is fixed to the wall or any other vertical surfaces. It simply fixed to all surface irregularities. It should be fixed each 10 cm max. Only using this type of profiles you can make curve parts of the ceiling without visible parts, even if radius is less than 200 mm. Minimum height loss is 2,5 cm. A chink between the wall and the profile is closed by the ghost type. So to fix the stretch ceiling into this profile you should use the straight shovels. The length of the profile is 2,5 m. |
Nº3 «Aluminum ceiling profile» 
Used for ceiling or any other horizontal surfaces fixing. Minimum height loss is 2 cm. A chink between the wall and the profile is closed by the ghost type. So to fix the stretch ceiling into this profile you should use the straight shovels. The length of the profile is 2,5 m. |
Nº4 «Aluminum universal profile» 
Used for all possible surfaces fixing, has a high rigidity that is why it could be fixed each 50 cm. Minimum height loss is 3 cm. A chink between the wall and the profile is closed by the ghost type. So to fix the stretch ceiling into this profile you should use the straight shovels. The length of the profile is 2,5 m. |
Nº5 «Aluminum wall profile» 
It is used for wall or any other vertical surfaces fixing . It has enough rigidity, does not lie to all wall irregularities. It should be fixed each 15-20 cm. Minimum height loss is 3,5 cm. A chink between the wall and the profile is closed by the ghost type. So to fix the stretch ceiling into this profile you should use the straight shovels. The length of the profile is 2,5 m. |
Nº6 «Aluminum separator» 
It is used for joining 2 canvases at column detouring around or overlapping the areas. Minimum height loss is 2 cm. A chink between the wall and the profile is closed by the ghost type. So to fix the stretch ceiling into this profile you should use the straight shovels. The length of the profile is 2,5 m. |
